Optical Glass
Colourless Optical Glass
Colourless Optical Glass

The colourless optical glass covers more than 200 types which including environmentally-friendly colourless optical glass, low softening point optical glass, non-eco optical glass and radiation resistant glass, etc. 

Colourless optical glass is widely used in consumer electronics such as camera, mobile phone, projector, CCTV camera. It is also widely used in astronomy, biology, medicine and aerospace, etc.


CDGM colourless optical glass is available in the form of glass blanks, pressed blanks, cut blanks,optical preforms as well as optical components.

The specifications are shown in the following table:

Glass blanks

Supply forms:

Stripsblocks

Dimensions:

Strips360mm×(80~160mm×(8~60mm

Blocksupon request of customers

Pressed blanks

Lens:

OD(outer diameter): Ф7mm~Ф350mm

CT(center thickness): 1.1mm~50mm

Rods:

OD(outer diameter): Ф3.2mm~Ф10mm

Length150mm

Pressed plates:

Length40mm~80mm

Thickness: 4mm~10mm

Special-shaped products:

Side length or diameter: 5mm~180mm

upon request of customers

Cut blanks

Round plates:

OD(outer diameter): Ф2.5mm~Ф150mm

CT (center thickness): 0.5mm~50mm

Cut prisms

Min edge length5mm

Max edge length150mm

Optical preforms

Dimensions:

Lens: OD(outer diameter): Ф2mm~Ф35mm

CT (center thickness): 0.4mm~25mm

Precision gob

Shapebiconvex oval

Volume:(100~650)mm3

Weight:(300~1830)mg

Weight tolerance±(525)mg

Optical components

Supply forms:

Spherical lens, aspherical lens, customized special-shaped products

Notes:The supply forms and dimensions depend on glass type. Please contact us.

  The allowable tolerance of nd and νd  is generally controlled within:

nd:±30×10-5 

vd:±0.5%

  As requested, the allowable tolerance of nd and νd could be controlled in ±20×10-5 and ±0.3% respectively. For fine anneal glass types of  H-K9L、H-K9LGT、H-BaK7、H-BaK7GT, the tolerance of nd and νd could be controlled in ±10×10-5 and ±0.2%. Please contact us for other specifications.


Product pictures